MLR导通电阻量测系统Micro Risistance Evaluation System

规 格

MLR导通电阻量测系统
Micro Resistance Evaluation System
型号(Model) MLR-34420 MLR-4338
※电阻测试范围
(Resistance measuring range)
10^-3 Ω ~10^6 Ω 10^-3 Ω ~10^4 Ω
低阻量测模式 (Low resistance evaluation mode) 直流(D.C.) 交流(A.C.)
测试频率
(Measurement frequency)
无(n/a) 1KHz
量测电池低阻(Evaluation of low
resistance for battery)
无(n/a) 可(available)
量测电阻值范围与测量档位
(Evaluation of resistance
range and measurement gear)
1Ω-10Ω
10Ω-100Ω
100Ω-1KΩ
1KΩ-10KΩ
10KΩ-100KΩ
100KΩ-1mΩ
AUTO(自动换档)
1mΩ~10mΩ
10mΩ~100mΩ
100mΩ~1Ω
1Ω~10Ω
10Ω~100Ω
100Ω~1KΩ
1KΩ~10KΩ
AUTO(自动换档)
电流测定范围
(Measurement current)
5μA.10μA.100μA.1mA.10mA 1μA.10μA.100μA.1mA.10mA.AC(rms)
搭配仪表(Measuring instrument) HP34420A HP4338B
测试方法(Measurement method) 4端子(线式)测试法 4-terminal (wire) measurement method.
通道数
(Channel configuration)
标准40信道(一次扩充40信道,最大320信道)
Standard 40 channels (max. 320 channels on 40 channel basis)
量测精度
(Measurement Accuracy)
±0.4%(<100mΩ:±10%) <100mΩ:±10% 100mΩ~10KΩ:±0.9%
>10KΩ:±5.5%
测试间隔
(Measurement intervals)
500ms
最大试验时间(Maximum testing time) 9999Hr
判定导通设定范围
(Setting range)
相对值判断变化量Rate of change evaluation:(ΔRa)0.1mΩ~1000.01mΩ
变化率Absolute value evaluation:(ΔRa)0.1%~99.9%绝对值判断 0.1mΩ~2KΩ
循环试验方式(Cycling method) 温度冲击、温湿度循环
(thermal shock, temperature and humidity cycling)
定点测试模式
(One-point testing mode)
定点高温、定点低温、定点温湿度、常温
one-point high temperature, one-point low temperature, one-point temperature and humidity, room temperature
记录数据内容(Recording data) 时间&循环数、电阻值、电阻变化率ΔRa、温度、湿度
time & cycle, resistance, change of resistance, temperature, humidity
EXCEL转档 XLS档案格式(超过档案容量自动分文件)
.xls file format (auto-filing when exceeding file volume)
计算机系统(PC system)
CPU Pentium Core2Duo以上
RAM 1GMB内存以上
Hard Disk 2个80GB硬盘以上
操作系统(OS) WinXP(Windows XP)单机版以上
显示器(Monitor) 17吋TFT屏幕17” TFT monitor
网络卡(Network interfacecard) 10/100M网络卡10/100M network interface card
光盘(CD-Rom drive) DVD烧录器DVD burner
UPS 避免系统发生电源瞬断
Uninterruptible Power Supply protects system from power failure
量测线材(Measurementcable) 耐热扁平排线,长度为从信号转接器起开始4m
Heat-resistant flat cable, 4m from connection unit
测试整合机台
(Integrated measurement system)
三箱气体式冷热冲击机、恒温恒湿机
air to air thermal shock tester, temperature and humidity chamber
系统柜尺寸(External dimension) W 600 ×H 1731 ×D 850 mm
电源要求(Power requirements) 电源AC110V~240V 1Φ 50/60Hz 10A
扩充设备(optional Accessories) PCB放置治具(PCB placement fixture)
 
※ 保证标准系统构成的电缆测试端的测试数据。Value guaranteed at end measurement cable of standard system.